- New
World's Fastest Online Shopping Destination
World's Fastest Online Shopping Destination
True-RMS Autoranging Multi-Function Clampmeter with 3 and 3/4 digit LCD (3999 Counts): Easy to use/operate; accurately measure AC current, AC and DC voltage, resistance. Can also do continuity, frequency, capacitance, temperature, and diode tests.
NCV or Non-Contact Voltage Detector: Detect the presence of voltage in an electrical circuit or equipment without touching the wires, red LED will flash quickly when an excess electric field is detected, NCV sensor is at the right upper area of the clamp.
With Accessories: Test probes, various types of test leads, crocodile clips, mini wire stripper tool, etc, has LCD display with backlight, data hold function, low battery detector, overload protection, auto power OFF after 15 minutes of inactivity.
See description for more details
This clamp meter is a versatile and essential tool for electricians and professionals who need to measure current, voltage, resistance, and continuity. The compact and easy-to-use design allows for accurate readings in tight spaces, while the large backlit display ensures visibility in low-light conditions. This clamp meter also features a data hold function and auto-ranging capability for added convenience and efficiency. With its rugged construction and reliable performance, this clamp meter is a great addition to any toolbox. Get accurate results every time with this top-quality clamp meter.
Specification:
• AC current range: 0.1A to 600A
• Maximum input voltage: 600V
• Resistance Range: 400/4k/40k/400k/4M/40M
•Capacitance: 4nF / 40nF / 400nF / 4uF / 40uF / 400uF / 4 mF
• Frequency: 4Hz/40Hz/400Hz/4KHz/40 KHz/ 400KHz/4MHz/10MHz
• Temperature: -20 °C ~ +1000 °C (-4 °F ~ +1832 °F)
• NCV: Non Contact Voltage Detector
• Maximum opening distance of the clamp jaw of 25 mm
• Model D has a 3 and 3/4 digit LCD (3999 counts)
• Diode: Open voltage: 1.999 V
• Continuity: When the resistance value is less than 50 Ω, the buzzer turns on
• Power supply: 3 V, 2 x 1.5 V AAA batteries
Features:
AC Current Range: 40A/600A only
• Autoranging
• 600 V input voltage protection
• Auto Power-OFF
• HOLD function/Back Light
• Over load indication: “OL” symbol displayed when exceeding the measuring range
• Low battery indication
Not only do you get the 6000 Counts Digital Multimeter, but you also get:
1. 1 pair of Normal Test Probes
2. 1 pair of Needle Test Probes
3. 1 pc Thermocouple
4. 5-in-1 Test Leads
5. Red and Black Crocodile Clip
6. 1 pc Mini Wire Stripper Tool
7. 2 pcs mini screwdrivers
8. 1 pc Black Insulating Tape
And on top of that, it comes with a printed Manual-User Guide and a flyer with a claim code for the Mastering the Art of Measurement eBook that teaches you the basics of performing electrical measurements and 3 pre-installed 1.5 V AAA batteries.
Press once to freeze or retain the display reading. Long press to activate the backlight.
Press the "FUNC" key to switch between the different measurements such as between diode and continuity.
“OL” displayed when exceeding the measuring range or if test probes are connected in reverse polarity.
The Jaw is marked with maximum current or voltage value making it safer and easier to use. The design is suitable for one-hand operation.
The red LED at the top right of the panel flashes quickly when an excess electric field is detected.
• Heat shrink tubes
• can test electrical circuit or equipment without touching it
• “EF” is shown when there is no measurement
• display changes from "-" to "----" depending on the strength of the electric field.
1 x Plusivo Digital Clamp Meter, 2 pairs x Test Leads, 5 pairs x set of test leads, 1 pair x crocodile clips, 1 x thermocouple, 1 x mini wire stripper tool, 2 pairs x mini screwdrivers, 1 x insulating tape, 2 x AAA batteries, 1 x Flyer, 1 x Carrying Bag
Specific References
No customer reviews for the moment.